Possible error message
The Finder cannot complete the operation because some data in “Cochlear 1 2009_08_17_11_22_12.avi” cannot be read or written.
(Error code -36)
An error message like this is likely to appear when you try to copy a file from a hardware device and put it on your computer. If the problem is not fixed in the right way, your operating system will suffer further damage. Eventually, you may experience system crashes, computer slowdowns, or program crashes.
We strongly suggest that you run a quick error code scan for your PC to check and fix any errors.
The truth of error code 36
In most cases, this error appears during the process of copying and saving files to your computer. If something goes wrong, you will get a message “browser cannot read or write files. Error code -36”. Therefore, you will not be able to copy or access that particular file.
Error code 36 appears to inform you of some failures in the input or output (I/O error) of your computer. You may see this error appear when you try to copy a file from one folder to another folder. This is irritating because you would keep getting error messages like this, and the process you need will immediately stop no matter how many times you try. You should know that if you do not fix the problem right away, you will have a serious problem after some time, such as system crashes or blue screen of death.
How to fix error code 36?
Once you know the truth of the possible causes and consequences of this error, the corrective steps should be taken to fix the error. You don’t have to worry because it is not a very complicated error and it could be easily fixed. If you want to get rid of the irritating error message and speed up your computer, you can follow the instructions below.
If you are using Mac OS x 10.6.2 and the MS-DOS.FAT formatted disk application, you must first create a new folder on the MS-DOS drive. Then you need to copy the file related to error code 36 and place it in the new folder you just created. Finally, copy the folder to the desktop, and then copy it to the MS-DOS drive.
If you don’t use Mac system and the error message still appears, you can go to Application > Utilities > Terminal and type “do_clean”. Then you have to click on the particular file and drag the file to the Terminal box and hit enter. After that you need to find the folder entry, copy and enter and copy the folder as shown in the above paragraph.
To ensure the safety and efficiency of your PC, get our ErrorCodeFix to fix error code 36 in minutes.
